Bonda Glass G4

G4 seals damp out of concrete, brick, stone and wood with a non-porous plastic coating that is hard wearing, tough but flexible. Being moisture cured it can be applied in poor conditions, down to 0 degrees centigrade and in high humidity. Three coats can be applied in a day to provide a good base for further decorations. For scenic use it is widely used to seal moisture out from moulds prior to laying up glass fibre. On boats it is useful for priming those areas which are impossible to completely dry out like patches on elm keels and deadwood and in joins between timber and glass fibre where moisture has penetrated. It is a very impressive product. 1kg will cover approximately 2 sq metres with three coats.

G4 seals damp out of concrete, brick, stone and wood with a non-porous plastic coating that is hard wearing, tough but flexible. Being moisture cured it can be applied in poor conditions, down to 0 degrees centigrade and in high humidity. Three coats can be applied in a day to provide a good base for further decorations. For scenic use it is widely used to seal moisture out from moulds prior to laying up glass fibre. On boats it is useful priming those areas which are impossible to completely dry out like patches on elm keels and deadwood and in joins between timber and glass fibre where moisture has penetrated. It is a very impressive product. 1kg will cover approximately 2 sq metres with three coats.

G4 seals damp out of concrete, brick, stone and wood with a non-porous plastic coating that is hard wearing, tough but flexible. Being moisture cured it can be applied in poor conditions, down to 0 degrees centigrade and in high humidity. Three coats can be applied in a day to provide a good base for further decorations. For scenic use it is widely used to seal moisture out from moulds prior to laying up glass fibre. On boats it is useful priming those areas which are impossible to completely dry out like patches on elm keels and deadwood and in joins between timber and glass fibre where moisture has penetrated. It is a very impressive product. 1kg will cover approximately 2 sq metres with three coats.

First coats of G4 used for wood priming should be thinned 20%.