Descenders

Self-braking descender for single 10-11mm diameter ropes. Brakes when handle is released. Can be installed on the rope without disconnecting it from the harness.

Training is essential before using these descenders in a real situation.

CE marked. (EN341 Classe A)
Individually Tested.

Self-braking descender for descending a rope and for belaying, with an anti-panic function.

_ Anti-error safety catch to reduce the risk of an accident due to incorrect installation of the device on the rope. _ Anti-panic function: if the user pulls too hard on the handle, the cam will lock on the rope.
_ Locking position on the handle for positioning while on the rope.
_ Can be used for short ascents [in conjunction with a footloop and handled rope grab]. Ideal for mast climbing.

Available in 2 versions:

D20 S for work on fixed ropes [with a safety clip on the swinging side plate: reduces the risk of dropping the device, practical for quick installation of the rope, efficient means for passing intermediate anchors].For ropes between 10 and 11,5 mm in diameter.

Certification D20 S : CE EN 341 Classe A, NFPA L.

Weight: 530 g.
Individually tested.

Self-braking descender for descending a rope and for belaying, with an anti-panic function.

_ Anti-error safety catch to reduce the risk of an accident due to incorrect installation of the device on the rope. _ Anti-panic function: if the user pulls too hard on the handle, the cam will lock on the rope.
_ Locking position on the handle for positioning while on the rope.
_ Can be used for short ascents [in conjunction with a footloop and handled rope grab]. Ideal for mast climbing.

Available in 2 versions:

D20 L for rescue. For ropes between 11,5 and 13 mm in diameter.

Certification D20 L : CE EN 341 Classe A, NFPA G.

Weight: 530 g.
Individually tested.

Figure of eight descender for single or double rope.
Smaller hole may be used for smaller diameter rope for an additional braking option.

Wt 100g.
Individually tested.