Flints Rapid One Pack Etch Primers

This primer was developed to have the advantage of a single pack etch primer but without the normal drawback of a very low flashpoint, common in most etch primers. Suitable for stoving or air drying applications to ferrous and non-ferrous metals that have been cleaned. Formulated free of zinc chromates to reduce toxicity. Whilst this product contains anti-corrosive pigments, its main purpose, as with other etch primers, is to improve the adhesion of following coats and so it should be re-coated as soon as possible if being exposed to a damp environment. It can be applied by conventional spray, airless spray, hot spray, electrostatic spray, or brush. Steel tubes can be quickly and conveniently covered using long arm radiator rollers
!!<Flash point 24°C<br>Free of zinc chromates
Specification - VOCC max 740g/litre, mass solids 20%, flash point 24°C, surface dry 20 minutes, recoatable after 30 minutes, coverage @ 15µDFT 12.5m2.
Consider using a 3M Organic Vapour Mask type 4251 when using these paints. Good ventilation should also be provided. For waterbased possible alternatives see Flints Multi Purpose Primer, Colourcoat and Breakthrough . Galvanised products should be weathered before painting [see AQ Primer]

A highly inflammable etch thinner

5 Litres