Lay Up Resin A (Crystic 47PA) This is a general purpose resin which is used for both casting and laminating. Resin A is filled and has a matt finish. It is suitable for hand props and interior work but is not fire retardant. Add 2ml of catalyst M to 100g of resin.
Fire Retardant Lay Up Resin (Crystic 356PA) This filled resin will comply with BS 476 part 6 and 7 Class 1 or Class 0 [as defined in section B of the building regs 1985]. It is particularly suitable for building larger pieces of scenery and mouldings. Add 2ml of catalyst per 100g of resin.
Marine Grade Resins (Crystic 2.406PA) This is a low styrene resin with good wet out properties. The geltime is approximately 11 minutes. Water absorption 14mg. Tensile strength 54MPa. Tensile modulus 3.7GPa. Elongation at break 1.7%. Lloyds approved.
