Online Catalogue

Main Pages


Product Sections


SP Micro Fibres

Online Catalogue | Marine | Varnish Paints & Yacht Maintenance | Solvent Based Glass Fibre System |  SP Micro Fibres

SP Systems Micro Fibres (0.1kg)SP Systems Micro Fibres (0.1kg) (ADHA215004M)

These are very fine wood-cellulose fibres commonly used to create structural adhesives for bonding both wood and grp. Because any low viscosity resin system is readily absorbed into a porous surface such as wood, an unfilled adhesive may tend to give a ‘dry joint’. With their absorbent properties, microfibres can retain a significant quantity of adhesive within a joint and limit resin absorption into the surrounding surface, thus ensuring an adequate resin supply for adhesion. Where the strongest bond is required, e.g. timber scarf joints, microfibres should always be used in preference to hollow sphere-types of filler. For bonding parallel to the grain with lower density, lower strength timbers, such as cedar or obeche, a microballoon mix is often adequate, and is of lower density.
Product Details:
-Composition: Milled bleached cellulose wood pulp
- Appearance: White ‘fluffy’ fibrous consistency
-Particle Size: 200 - 300 microns
-Particle Density: Particles absorb resin
- Bulk Density: 100g/litre approx.

Price: £3.89 (£4.67 Including VAT at 20%)


Quantity:  

SP Systems Micro Fibres (0.5kg)SP Systems Micro Fibres (0.5kg) (ADHA215003M)

Price: £9.59 (£11.51 Including VAT at 20%)


Quantity:  

Online Catalogue | Marine | Varnish Paints & Yacht Maintenance | Solvent Based Glass Fibre System |  SP Micro Fibres