Silver Shrink Mirror

Online Catalogue | Scenic Fabrics and Flooring | Rosco Designer Materials | Silver Shrink Mirror

Silver Shrink Mirror (ROS3909)

This is a lightweight metallised plastic laminate which create stunning mirror panels when correctly stretched. The mirror must be securely fixed to a rigid frame. We recommend a 3*1 mortice and tenon flat frame with an extra bevelled piece of timber glued and pinned to the face of the frame to raise the mirror clear. Care should be taken to carefully remove the arris on the bevel. Cover the bevel with a continuous run of gaffer tape to soften the corner further. When stretching the mirror apply small tabs of gaffer tape before stapling through into the wood on the side of the frame. Fix the centre of the long edge first then stretch this edge at the corners and then centre repeatedly until the staples are about 100mm apart. Then run a continuous run of gaffer tape and staple every 25mm down the long edge. Stretch the other sides using the same technique but only finally gaffer once you are happy that there are no significant wrinkles. Ideally use a propane space heater and walk the flat past slowly about 250mm from the machine. Don`t stop! Keep moving the flat until the scrim is stretched tight providing a perfect mirror finish.

1.37m wide x 9.15m long roll

Price: £78.00 (£93.60 Including VAT at 20%)

Quantity:

Online Catalogue | Scenic Fabrics and Flooring | Rosco Designer Materials | Silver Shrink Mirror

Shopping Cart

Silver Shrink Mirror