SATAjet 100 B P

Any waterborne and solvent-based material available on the market can be sprayed without restrictions with this new spray gun which was designed for spraying polyester fillers. The huge 2.5mm nozzle enables fantastic splattering effects to be performed at speed but the gun will also cope with applying layers of Idenden Spraycote and, of course spray fillers. This gun is not fitted with an air micrometer, flow should be regulated at the compressor.

- A specialist gun for spraying fillers and gesso.
- Correct atomisation for fillers etc. Very controlled application.
- Capable of large splatter effects when used at low pressure.

Technical data: Inlet pressure 2 bar (29psi), air consumption 245 Nl/min (8.7cfm), spray distance 180-230mm (7-9 inches).