Scaffold Clamps and Fittings

Online Catalogue | Tube Fittings, Castors, Hinges, General Hardware and Fixings | Tubes & Clamps |  Scaffold Clamps and Fittings

Swivel Coupler (SCF051) Use 21mm podger or 7/16 W scaffold spanner Price: (9 or fewer items) £4.60 (£5.52 Including VAT at 20%) Price: (10 or more items) £3.70 (£4.44 Including VAT at 20%) Quantity:

Half Swivel (SCF051H) In plain finish ready to weld to your scenery. Use 21mm podger or 7/16 W scaffold spanner. Price: (9 or fewer items) £2.31 (£2.77 Including VAT at 20%) Price: (10 or more items) £1.92 (£2.30 Including VAT at 20%) Quantity:

Fixed Right Angle Coupler (SCF052) Use 21mm podger or 7/16 W scaffold spanner. Price: (9 or fewer items) £4.01 (£4.81 Including VAT at 20%) Price: (10 or more items) £3.00 (£3.60 Including VAT at 20%) Quantity:

Rotalock (SCF130) Designed for use with cattle pens as there are no sharp protrusions. These fittings are ideal for auditorium structures as the smooth profile will not catch clothing etc. They also make very rigid boom arms and tighten with just one bolt. Price: £6.75 (£8.10 Including VAT at 20%) Quantity:

Angled Cross Over (DOUT25150) Neater than a scaffolding clamp for permanent installations. Price: £5.59 (£6.71 Including VAT at 20%) Quantity:

Joint Pin (SCF111) These are best on tubes in compression rather than horizontal flying bars. Price: (9 or fewer items) £3.02 (£3.62 Including VAT at 20%) Price: (10 or more items) £2.50 (£3.00 Including VAT at 20%) Quantity:

Solid Tube Joiner (SCF114) A good choice for strong horizontal joints. Price: £11.59 (£13.91 Including VAT at 20%) Quantity:

External Bolt Barrel Joiner (SCF113) A popular and strong joiner for aluminium flying bars. Price: £14.61 (£17.53 Including VAT at 20%) Quantity:

Putlog Coupler (SCF117) Allows a tube to be fixed at right angles leaving the top of the horizontal tube clear for decking. Price: £1.60 (£1.92 Including VAT at 20%) Quantity:

Stair Tread Coupler (SCF118) A dual handed fitting for fitting scaffold board treads to scaffold stringers. Price: £5.00 (£6.00 Including VAT at 20%) Quantity:

Adjustable Scaffold Foot (SCF140) Useful for levelling staging legs on uneven ground such as thrust stages landing on raked auditorium floors. Overall height 225mm. Price: £15.00 (£18.00 Including VAT at 20%) Quantity:

Scaffold base Plate (SCF119) Reduces point loading, prevents damage to floors and can be fixed in place to avoid scaffold legs being shunted out of position. Price: £1.00 (£1.20 Including VAT at 20%) Quantity:

Doughty Universal Clamp BZP 48mm x M12 (DOU30400) Many uses including fixing scaffolding bars to Ceiling Saddles and other brackets. Holds a M12 bolt captive. Price: £5.66 (£6.79 Including VAT at 20%) Quantity:

Doughty Universal Clamp (Black) 48mm x M12 (DOU30404) Many uses including fixing scaffolding bars to Ceiling Saddles and other brackets. Holds a M12 bolt captive. Picture shows BZP version. Price: £8.10 (£9.72 Including VAT at 20%) Quantity:

Doughty Universal Clamp BZP 38mm x M8 (DOU30401) Many uses including fixing 38mm bars to brackets. Holds a M8 bolt captive. Picture shows larger size. Price: £5.68 (£6.82 Including VAT at 20%) Quantity:

Doughty Universal Clamp BZP 25mm x M6 (DOU30402) Many uses including fixing steel 25mm conduit to brackets. Holds a M6 bolt captive. Price: £5.10 (£6.12 Including VAT at 20%) Quantity:

Hanging Clamp (with hole for shackle) (FHS002HC) Used to secure flying wires or hemplines to lighting bars so that the line cannot slide along the bar. Can also be used inverted as a fixing point on flying bars for small pulleys. The smart black appearance makes front of house rigs less unsightly. Our hanging clamps have all the sharp corners removed so they are less likely to catch on cloths and gauzes. When touring, lines can be quickly refixed in the same place without needing unsightly tape marks. If flying heavy loads always use the hanging clamp with a tested shackle. The SWL may be affected by the rating of the shackle. Fits bars from 45 to 55mm. The finish is black powder coated. The hole for the shackle is 13mm diameter. Size: 220x40x65mm. Fixings supplied: 2 off M10x45 HT bolts with nylocks and washers Safe Working Load 550kg Click Here for Safety Information Sheet Price: (49 or fewer items) £4.50 (£5.40 Including VAT at 20%) Price: (50 or more items) £4.00 (£4.80 Including VAT at 20%) Quantity:

Hanging Clamp with Ring (FHS002HCR) This is the same fitting as the hanging clamp but is fitted with a ring. It is only suitable for lighter loads. Size: 220x40x65mm. Fixings supplied: 2 off M10x45 HT bolts with nylocks and washers Safe Working Load 150kg Click Here for Safety Information Sheet Price: (49 or fewer items) £4.95 (£5.94 Including VAT at 20%) Price: (50 or more items) £4.35 (£5.22 Including VAT at 20%) Quantity:

Online Catalogue | Tube Fittings, Castors, Hinges, General Hardware and Fixings | Tubes & Clamps |  Scaffold Clamps and Fittings