Sill & Reveal Irons

Used to provide strength to door flats. They are made to suit your requirements, from steel flat bar with a rounded top section. They should be ordered by stating the distance between the lugs. On a 3 x 1" timber flat with a reveal around the door this is generally the door opening plus 45mm. The sill iron is drilled and countersunk in two places to screw downwards into the floor for standing sets and is also drilled to screw upwards into the bottom rail to give the flat stiffness. The iron will protrude beyond the lugs by 120mm unless stated otherwise.

Supplied painted black.
Size: Stated width between lugs plus 290mm x 200mm height.
Fixings: No 10 csk screws or M5 csk machine screws.

Because this product is made to order, it is not possible to order this product online, please telephone or email with your specific requirements

Like the sill iron the reveal iron is used to provide strength to a doorway but this time the lugs are at right angles to the sill and are bolted through the door reveal. They are made to order and the measurement we require is the distance across the outside of the reveal. On wide reveals of heavy flats we recommend the use of two per doorway.

Supplied painted black.
Size: Stated width between lugs plus 8mm x 200mm height.
Fixings: No 10 csk screws or M5 csk machine screws.

Because this product is made to order, it is not possible to order this product online, please telephone or email with your specific requirements