These grippers have been developed in cooperation with the industry’s top experts to provide a simple, neat and modern solution to rigging static loads. Simply press down the sprung
plunger and slide the fitting along your wire to the desired place. Then just release the plunger and the fitting will grip the wire rope. When you are satisfied with the position simply hand-tighten the safety cap to prevent accidental release.

You can rest assured that the load will be secure as Reutlingers® not only have TÜV GS certification but also have the test seal of the DGUV which is only conferred after extensive examination of all load applications but also of most anticipated mis-applications. In fact, Reutlinger® 50, 66, and 80 ranges are the only load- bearing devices
certified by DGUV for use in touring productions.

• Quick, infinitely adjustable and re-usable!
• Just press down the sprung plunger and it will slide along the wire. Release it and it will grip
• One-handed operation!
• No tools needed!
• Non-reflecting black finish ensures the fittings are barely visible on stage
• Protected against accidental release by hand tightening the knurled safety cap
• Available with central or side cable exit and a choice of four different coupling parts
• Certified to TÜV-GS and BGV C1

Please note: Reutlingers have thousands of uses but they are not suitable for dynamic loads. You should not use them for flying moving scenery and they should not be used outdoors.